Manual

Installation Instructions for

Isis Pendent

980ISISGP

CAUTION - RISK OF FIRE

This product requires installation by a qualified

electrician. Before installing be sure to read all

instructions and TURN THE POWERTO THE

ELECTRICAL BOX OFF.

Assemble the Fixture

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

Suspension

1.0

LF625_2D

INNER GLASS

Place the outer glass on the ground standing up and

install the inner glass.

OUTER GLASS

Screw the lamp into the socket.

SOCKET

LAMP

Use

Type A19 Medium Base Lamp.

120 voltMAX 75 Watt

PAGE 1
Installation Instructions for 980ISISGP LF625_2D Isis Pendent Suspension GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. CAUTION - RISK OF FIRE This product requires installation by a qualified electrician. Before installing be sure to read all instructions and TURN THE POWER TO THE ELECTRICAL BOX OFF.
PAGE 2
1C MOUNTING ROD MOUNTING ROD C AUTION: Due to the fixture’s weight, assistance will be need for installation and relamping. 3 2 Place the hardware inside the inner glass, align the inner and outer glass mounting holes, and completely install the thumb screws. Re-lamping: To re-lamp, reverse the installation instructions to gain access to the socket. C AUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture.