Installation Guide

Installation Instructions for

Diamant Pendant and Grande

980DIAMAP

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing

NEC compliant junction boxes.

This product is suitable for damp locations.

Incandescent lamps may be dimmed with a standard incandescent

dimmer. LED lamps may be dimmed with a LED dimmer. Consult

lamp manufacturer for additional information.

1.0

LP1037, LP1038

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

Suspension

Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.

Install the Fixture

LAMP

PAGE 1
Installation Instructions for 980DIAMAP Diamant Pendant and Grande LP1037, LP1038 Suspension GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is suitable for damp locations.
PAGE 2
SAVE THESE INSTRUCTIONS! 1 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2018 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.