Instructions / Assembly

Installation Instructions for

Suspension

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

Togan and Togan Grande Pendants

980TOGANP

1.0

893_, LP892_LP

Assemble the Pendant

Unscrew and remove the fixture cap from the socket

assembly and cord.

SOCKET ASSEMBLY

CAP

CORD

Ensure that the washers are in place and feed the fixture

cord through the shade.

Reinstall the cap onto the cord.

CAP

SHADE

Insert the socket assembly nipple through the top of the

shade and secure it in place with the cap.

Screw the lamp into the socket.

NIPPLE

CAUTION: To reduce the risk of a burn or electric

shock during re-lamping, disconnect the power to

the fixture.

Refer to fixture marking for lamp information.

SOCKET

LAMP

PAGE 1
Installation Instructions for 980TOGANP Togan and Togan Grande Pendants LP893_, LP892_ 1.0 Suspension GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. Assemble the Pendant 1A 1C CORD CAP NIPPLE SOCKET ASSEMBLY 1 1 Insert the socket assembly nipple through the top of the shade and secure it in place with the cap. Unscrew and remove the fixture cap from the socket assembly and cord.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2016 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.