Owner's manual
1A
1
Installation Instructions for
Mini Isis
1.0
HW545_2G60
980ISISCW
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
MOUNTING PLATE
Loosen the set screw on the fixture arm(Do Not Remove)
with the provided Allen wrench.
Remove the mounting plate.
2
1
FIXTURE ARM
1B
Install the mounting plate to the electrical box with the
provided two #8-32 screws.
#8-32 SCREW
ELECTRICAL
BOX HOLE
MOUNTING PLATE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
3
1
2
3
3