Installation Guide

1
Installation Instructions for
Interlace Suspensions
980INTERS
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
Suspension
1.1
SU767_, 832_, SU833_SU
Preparing the Canopy
1
1A
CROSSBAR
CANOPY
THUMB NUTTHUMB NUT
Remove the cross bar from the assembly by
unscrewing the two thumb nuts.
Mount the crossbar to the electrical box with the two
#8-32 screws.
CROSSBAR
ELECTRICAL
BOX
#8-32 SCREW #8-32 SCREW
1B
2
2 2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.