Installation Guide

1C
With the Allen wrench provided, back out (do not fully
remove) the set screw at the base of the fixture.
1D
Properly place the driver, all wires, and wire nut
connections into the electrical box.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
Tighten the set screw at the bottom of the fixture.
6
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2016 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
SAVETHESE INSTRUCTIONS!
2
7
SET SCREW
ALLEN WRENCH
SET SCREW
5
ALLEN WRENCH
8
8
5