Users Manual

35
36
5.4.1 System-User
5.4.2 System-Time Setting
Click “System—Time setting” to access time setting menu. There are four types of time mode:
keep current, manual, Sync with computer time and Sync with NTP.
1) “Keep Current” means the system time won't be changed.
2) “Manual” means adjust time manually. Users need to enter date & time and time zone
manually.
3) “Sync with computer time” means through this apply to sync IPC system time to local PC
time.
If users select “Work Mode”, click “ ” to access the interface as follows. Users can set
up three different time period on workday and weekend, the max number of time span is 24.
If users select “All Day Time”, all the times will be enabled.
Note: Please make sure the device system time is correct before you set the alarm time
period.
Notice: When the motion detection alarm function is enabled, the motion detection alarm
can be triggered after the indoor monitor is in standby mode for 30s. If a motion detection
alarm is triggered, the screen will be highlighted and the motion icon will be shown.
5.4 System
Click “System” to enter the parameters setting menu. This interface includes settings for
User, Time setting, Initialize, Device info, Storage Device and System Logo.
5.3.6 Event--Record
Click “parameters-Event-Record” to access the setting menu to set up record mode when
calling on the doorbell as follows. Modes include “record” and “snapshot”. For the record
mode, the whole process will be recording from the start of a call. For the snapshot mode, if a
visitor calls on the outdoor camera, the first picture will be captured.
The video record can be played back via IE browser or the “uCareHome” app, and the
snapshots can be played back via IE browser.
5.4.1 System-User
Click “System—user” to access user setting menu, the default username and password of
administrator is “Admin” and “888888”. And the administrator can add seven guest users who
can only monitor the live view and unlock for the indoor device via IE browser remotely.
4) “Sync with NTP” will choose a same time zone with the NTP server automatically. Server
name is the NTP server host, and the interval of refresh time includes 1 hour, 2 hours, 12 hours
and 24hous. Save all parameters, then it will update as a network clock.
5) Delay push(s): From this field, user can adjust delay duration time of alarm push for visitor
calling when nobody answers on the indoor unit, and values can be set from 0 to 60s. For
example, to select 5s, if visitor presses the call button on the outdoor camera, the message
will be pushed onto the master’s phone after 5 seconds when nobody answers on the indoor
unit.