Specification Sheet

ManualsBrandsLCN ManualsCommercial HardwareHeavy Duty Concealed-In-Frame Mount Door Closer from the 2010 Collection

Standard 2010 series closer shipped with standard arm, standard track,

metal finish plate and wood and machine screw pack. See 2010 Series

page 9 for options.

Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”.

Handed for right or left swinging doors.

For aluminum, hollow metal, or wood, doors and frames.

Aluminum frame requires minimum 4” x 4” (102 mm) tube.

Closers to meet ADA requirements. See 2010 Series page 10.

Standard or optional custom powder coat finish.

Optional plated finish on arm, fasteners and finish plate.

Optional SRI primer for installations in corrosive conditions.

The concealed 2010 Series is a

heavy duty closer designed to

provide complete concealment.

The single lever arm and roller

assembly provide smooth, quiet

door control and the choice of

finishes and track functions meet

virtually all architectural

requirements.

The 2010 Series is UL & cUL listed

for self-closing doors without hold-

open. Tested and certified under

ANSI Standard A156.4, grade 1.

FEATURES

LCN 2010 SERIES

POWDER COAT

PLATED

CONCEALED

MOUNTING

FINISH

CONCEALED

EXPOSED

ARM

ACCESSIBILI

CYLINDER *ARM FUNCTION

DELAY

ACTION

REGULAR

(DOUBLE)

STANDA

RD (SINGLE)

HANDED

SIZED

110°

HOLD-OPEN

180°

IN FRAME

IN 1 3/4" TUBE

IN DOOR

Available

Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

*Maximum opening/hold-open point with standard template. See individual closer series

for degrees of opening per installation.

CONCEALED (IN FRAME) MOUNTING

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

FAX 800-248-1460

www.lcn.ingersollrand.com

9/07

Summary of content (4 pages)

PAGE 1
The concealed 2010 Series is a heavy duty closer designed to CONCEALED (IN FRAME) MOUNTING provide complete concealment. FEATURES LCN 2010 SERIES The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. The 2010 Series is UL & cUL listed for self-closing doors without holdopen. Tested and certified under ANSI Standard A156.4, grade 1.
PAGE 2
MOUNTING DETAILS LCN 2010 SERIES CONCEALED MOUNTING For interior or exterior doors. Single acting cylinder in head frame. Concealed arm and track in door top rail. MAXIMUM OPENING Butt hinge template allows 180°, trim permitting. Limited to 110° when optional bumper is installed. Adjustable hold-open points from 85° to 110°, with hold-open track. Consult factory if door will be held open at 180° Offset pivot template allows 110°, trim permitting. Limited to 95° when optional bumper is installed.
PAGE 3
ACCESSORIES LCN 2010 SERIES CYLINDERS CYLINDER, 2010-3071 Standard, handed, cast iron cylinder assembly with mounting plate. For various applications see “Table of Sizes” on 2010 Series page 10. 3071 ARM STANDARD ARM, 2010-3077T Handed arm. Track roller not included with arm. 3077T TRACKS STANDARD TRACK, 2010-3038 Standard, non hold-open, non-handed track. Will accept hold-open clip and/or bumper assembly.
PAGE 4
ORDERING INFORMATION LCN 2010 SERIES TABLE OF SIZES Select closer based on width of door. 2010 Series cylinders available in size 1, 3, 4, 5, or 6. Closing power of all 2010 Series closers may be increased 15%. Specify next higher size closer where strong drafts exist. Indicates recommended range of door width for closer size.