User Manual

11
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
TECHNICAL DATA
Model number: LDMIX102AG3
Product type: PA speaker with built-in mixer and Bluetooth
Type: active
Woofer size: 10“
Woofer size: 254 mm
Woofer magnet: Ferrite
Woofer brand: custom-manufactured
Woofer voice coil: 2“
Woofer voice coil: 50.8 mm
Tweeter size: 1“
Tweeter size: 25.4 mm
Tweeter magnet: Ferrite
Tweeter brand: Celestion
Tweeter voice coil: 1“
Tweeter voice coil: 25.4 mm
Dispersion angle (H x V): 80° x 70°
Frequency response: 65 Hz–20,000 Hz
Amplifier: Class D
Amplifier power (RMS): 2 x 200 W
Amplifier power (peak): 2 x 400 W
Max. SPL: 124 dB
Protective circuitry: limiter, short circuit, voltage surge protection, overload, overheating
Mixer
Channels: 7
Microphone input channels: 3 (switchable 48V phantom power)
Microphone input connections: XLR/6.3 mm jack (combo)
Microphone input channel controls: EQ High, EQ Low, DFX send, Level,
Hi-Z switch (channel 1 only, 1 MOhm), +10 dB switch
Line input channels: 2
Line input channel connections: 1 x 3.5 mm stereo jack
2 x XLR/6.3 mm jack (combo)
Line input channel controls: Level
Monitor line-outs: 1
Monitor line-out connection: 3-pin male XLR (balanced)
Monitor line-out controls: Monitor level
Monitor line-out max output: 17 dBu
Subwoofer line-outs: 1
Subwoofer line-out connection: 3-pin male XLR (balanced)
Subwoofer line-out controls: Sub level
Subwoofer line-out max output: 17 dBu
Speaker output: 1
Speaker output connection: speakON-compatible connection (200 W RMS, min. impedance 4 Ohms)
DSP digital effects processor
DSP number of programmes: 16
DSP controls: presets, DFX return, mute switch
DSP display elements: Peak LED
Footswitch connection (DFX Mute): 1
Footswitch connection type: 6.3 mm jack
Footswitch type: normal open contact (pnp)