User manual

15
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
TROUBLE SHOOTING:
PROBLEM DISPLAY SOLUTION
No sound or volume
too low.
Transmitter: Display is turned
off.
Make certain that transmitter is turned on.
Make sure that batteries are ok.
Receiver: Display is turned off. Check power connection.
Turn power on.
Receiver: RF indicator is off.
Transmitter: Power is turned
on.
Check up that transmitter and receiver are set to
the same frequency.
Reduce distance between transmitter and receiver.
Attend that transmitter and receiver are in direct
line-of-sight.
Make certain that antennas of receiver are con
-
nected and positioned upwards in V-shape.
Receiver: RF indicator is
illuminated.
Bodypack transmitter: Display
is turned on, Mute LED lights
up.
Deactivate mute function.
Receiver: RF indicator is
illuminated.
Increase volume of receiver.
Increase gain of transmitter.
Check audio connection of receiver and mixing
board.
Check mixing board settings.
Distortion or unwanted
noise.
Receiver: RF indicator is
illuminated.
Remove possible reasons of interference (digitally
controlled units, other wireless systems in same
location).
Set wireless system to different transmission
frequency.
Distorted sound.
Transmitter: Battery symbol
blinks.
Receiver: AF level meter too
high.
Replace batteries
Reduce gain of transmitter.