User manual

9
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
27
BATTERY COMPARTMENT
To replace the batteries, open the battery compartment of the pocket transmitter by simultaneously pressing both markers on the sides of the
battery cover and opening it forwards. Remove the used batteries and replace with new batteries (AA/LR6, alkaline), following the diagram in
the battery compartment. Replace the battery compartment cover on the housing and click it into place. If the transmitter is not used for a long
period, remove the batteries to avoid damage to the transmitter from leaking batteries.
ATTACHING THE POCKET TRANSMITTER
Attach the transmitter to a belt or strap as shown.
1
2
3
MINI-XLR
sleeve tip
6,3 mm jack
1
2
3
MINI-XLR
1
2
3
MINI-XLR
R
2,2k
PIN ALLOCATION FOR MINI XLR CONNECTOR (POCKET TRANSMITTER)
Guitar, bass and other high-impedance signal sources.
Condenser microphone with internal pull-up resistor.
Condenser microphone without internal pull-up resistor.