Manaul

EQ SETTINGS BASS EQ G: +/- 15dB Bass frequency gain from -15dB to +15dB
f: 60Hz / 80Hz / 100Hz / 200Hz Setting the bass frequency
MIDDLE EQ G: +/- 15dB Centre frequency gain from -15dB to +15dB
f: 500Hz / 1000Hz / 1500Hz /
2500Hz
Setting the centre frequency
Q: 0.50 / 0.75 / 1.00 / 1.25 Setting the Q-factor
TREBLE EQ G: +/- 15dB Treble frequency gain from -15dB to +15dB
f: 10.0kHz / 12.5kHz / 15.0kHz
/ 17.5kHz
Setting the treble frequency
EXIT EQ
SETT.
Exit equalizer menu (press encoder)
EXIT AUDIO SETT. Exit sub-menu (press encoder)
INDIVIDUAL USERNAME (NAME)
Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select NAME (highlighted) and press the
encoder to conrm. Now set the individual name (up to 8 digits) by turning the encoder to select a letter, character or number for the rst digit of
the name and conrm by pressing the encoder. This is followed by the input for the second digit and so on. Once the name is complete, press the
encoder again to conrm. Briey (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will
appear automatically.
SET THE DISPLAY BRIGHTNESS (BRIGHTNESS)
Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select BRIGHTNESS (highlighted) and press
the encoder to conrm. Select the 3-step display brightness (HIGH = high, MID = medium, LOW = low) by turning the encoder as desired and press 2x
on the encoder to conrm. Briey (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will
appear automatically.
LOCK OPERATING ELEMENTS (PANEL LOCK)
Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select PANEL LOCK (highlighted) and press the
encoder to conrm. To lock the control elements, select ON by turning the encoder and press the encoder twice to conrm. Briey (!) press POWER
to return directly to the main display; after about 10 seconds of inactivity the main display will appear automatically. If one of the POWER controls or
the MENU rotary-push encoder is pressed, "PANEL LOCK ON" briey appears on the display and setting changes are blocked. To unlock the controls,
press and hold the rotary-push encoder for about 2 seconds and select OFF in the PANEL LOCK menu item to permanently allow operation using the
controls.
11
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI