Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Diffusion : Internal Status : Confidential Ref : C3131320010 Version : A1 External Limited ✘ Extended ✘ Mounting procedure TCU Reference : C3131320010 Version A1 Internal Approval Name and Department Date Author Check Approver D. LUCE (MD) S.BAIGET (SY) P.
Mounting procedure TCU Ref : C3131320010 Version : A1 MODIFCATION LIST: CONFIDENTIAL INFORMATION Modification date 13/04/2015 17/06/2015 Chapter / pages All §8 Comments Creation Modification of regulatory notices Author D.LUCE M.GUERIN This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Version A0 A1 C3131320010-A1-TCU_Mounting_Specification.
Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Chapter : 1. PURPOSE..................................................................................................................................4 2. TCU PRODUCT DESCRIPTION................................................................................................4 2.1.
Mounting procedure TCU 1. Ref : C3131320010 Version : A1 PURPOSE CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. This document is the Mounting procedure of the TCU. TCU is a part of a Tire Pressure Monitoring System. The Telematic Control Unit (TCU) collects information on the vehicle and transmits it over the GSM network to a back-end server.
Mounting procedure TCU Ref : C3131320010 Version : A1 screw CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Cover 10 Ways Delphi Connector APEX 150 Nitto vent Silent block Housing Spacer screw C3131320010-A1-TCU_Mounting_Specification.
Mounting procedure TCU 3. MAIN FEATURES CONFIDENTIAL INFORMATION 3.1. This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission.
Mounting procedure TCU 4. Ref : C3131320010 Version : A1 TCU MOUNTING INTERFACE. CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. The TCU is mounted on a plane surface fixed on the vehicle frame. The TCU has 3 mounting points equipped with silent blocks. The TCU must be fixed on a support (available on demand). This support (TCU interface) is defined in the appendix. 5.
Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Nut M6 Interface TCU Washer Screw M6 TCU Assembled onto support TCU Assembly Universal fixation kit can be provided by LDL. It consists of a base plate and an extension plate. A combination of these parts is able to fit all vehicle types.
Mounting procedure TCU Ref : C3131320010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. LDL TCU bracket combinations To link a base support to an extension support , 2 bolts are needed, type M6, length 16mm, with 2 M6 washers (1 standard type and 1 Belleville type). 6.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Ref : C3131320010 Version : A1 Cable management in the TCU neighborhood. Incorrect wiring will prevent the system from operating properly. TCU has to be connected to +12V or +24V through 5A fuse protection. TCU must be connected on Ignition (IGN).
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU UNLOCKED POSITION OF THE CPA Ref : C3131320010 Version : A1 LOCKED POSITION OF THE CPA TCU harness Delphi APEX 150 Clip holder, IP69K 7.
Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. TCU Ref : C3131320010 Version : A1 TCU Vehicle axis Truck TCU Trailer TCU MANDATORY TCU location: TCU-one point fixation side In green Vehicle axis C3131320010-A1-TCU_Mounting_Specification.
Mounting procedure TCU 8. FCC/IC REGULATORY NOTICES CONFIDENTIAL INFORMATION 8.1. This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Ref : C3131320010 Version : A1 MODIFICATION STATEMENT: LDL Technology has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Mounting procedure TCU CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 8.4. Ref : C3131320010 Version : A1 FCC CLASS B DIGITAL DEVICE NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Ref : C3131320010 Version : A1 Bracket in steel, thickness 2mm, with surface treatment to withstand at least 1500hr NSS C3131320010-A1-TCU_Mounting_Specification.
CONFIDENTIAL INFORMATION Ref : C3131320010 Version : A1 This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU Interface Drawing C3131320010-A1-TCU_Mounting_Specification.