Ref : C3140690010 Version : A1 Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Diffusion : Internal Status : Confidential External Limited ✘ Extended ✘ Mounting procedure TCU 1.2 Reference : C3140690010 Version A1 Internal Approval Name and Department Date Author Check Approver D. LUCE (MD) T.MOREAU (SW-SY) P.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 MODIFCATION LIST: Chapter / pages Comments Author A0 Modification date 22/12/2016 All Creation D.LUCE A1 03/05/2017 §4 §5 §6 §7 & §9 New Bracket and warranty conditions D.LUCE CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Chapter : 1. PURPOSE..................................................................................................................................4 2. TCU 1.2 PRODUCT DESCRIPTION ......................................................................................... 4 2.1.
Ref : C3140690010 Version : A1 Mounting procedure TCU 1.2 1. PURPOSE CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. This document is the Mounting procedure of the TCU 1.2. TCU 1.2 is a part of a Tire Pressure Monitoring System. The Telematics Control Unit (TCU) collects information on the vehicle and transmits it over the GSM network to a back-end server.
Ref : C3140690010 Version : A1 Mounting procedure TCU 1.2 3. MAIN FEATURES CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 3.1.
Ref : C3140690010 Version : A1 Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Pin number 4. Mnemonic Function 5 RS_RX2 Serial reception 2 6 RS_TX2 Serial transmission 2 7 FG_GND Fuel gauge ground 8 FG_PWR Fuel gauge power supply TCU1.2 MOUNTING INTERFACE The TCU 1.2 is mounted on a plane surface fixed on the vehicle frame. The TCU 1.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Universal fixation kit can be provided by LDL. It consists of a bracket base and a bracket extension. A combination of these parts is able to fit all vehicle types. TCU 1.2 onto support OK NOk on this side LDL TCU 1.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 To link a bracket base to a bracket extension, 2 bolts are needed, type M6, length 16mm, with 2 M6 washers (1 standard type and 1 Belleville type). 6. TCU 1.2 CONNECTION CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. After its connection onto TCU 1.2, cable must be fastened as close as possible of its TCU 1.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 When TCU 1.2 and ECU or EBS are connected to a same CAN network, they must share the same ground. CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. LDL Technology can provide the wiring harness ; see table below : Table is not exhaustive ,ask to LDL for details TCU 1.2 connected to LDL harness are IP69K & IP 68. 7. TCU 1.
Ref : C3140690010 Version : A1 Mounting procedure TCU 1.2 Each TCU 1.2 must be at a central point between the wheels that it has to receive, and aligned on the vehicle axis. Distance between TCU 1.2 and WUS would not exceed 3 meters. CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. When trailer is equipped with an EBS, TCU 1.2 bracket should be fixed to EBS bracket.
CONFIDENTIAL INFORMATION Ref : C3140690010 Version : A1 This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 8. FCC/IC REGULATORY NOTICES 8.1. MODIFICATION STATEMENT LDL Technology do not approve any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A1 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Mounting procedure TCU 1.2 9. Ref : C3140690010 Version : A1 APPENDIX CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. TCU 1.2 interface dimension, see drawing below ref. 2160620000 C0 LDL Technology SAS – Toulouse – France 13/ 13 Copyrights 2016 C3140690010-A1-TCU12_Mounting_Specification.
