User's Manual
Table Of Contents
CONFIDENTIAL INFORMATION
This document is the exclusive property of LDL Technology.
No content may be transmitted or reproduced in any form without written permission.
Mounting procedure
TCU 1.2
Ref : C3140690010
Version : A1
3. MAIN FEATURES
3.1. ELECTRONIC FEATURES
Power supply (5A fuse protected) 7 to 32 VDC
Operating current 1 A
Integrated Battery Power Supply (park mode) 3,65 VDC
Temperature operating range -40°C to 85°C
Storage temperature range 0 to 30°C
Legal Regulations
R&TTE (99/5/EC)
FCC/IC
PTCRB
E marking
Antennas (GSM, GPS and RF) Internal
3.2. MECHANICAL FEATURES
Total Mass 490 g
Dimensions (L x W x H) 160 x 180 x 75 mm
1 or 2 Connector(s) (8 Ways) Deutsch DT06 serie
Tightness IP 68 & IP69K
Mounting LDL Brackets (see §4)
Wiring LDL harnesses (see §6)
3.3. CONNECTOR PIN OUT
Gray Connector: WARNING / See Product Specification
Pin number Function
1 Can Hi
2 Can Low
3 V Bat
4
Not connected or RX
5
Not connected or TX
6 GND
7
Not connected or internal Batt disable
8 Not connected
Black Connector:
Pin number Mnemonic Function
1 FG_IN1 Fuel gauge analogue input 1
2 FG_IN2 Fuel gauge analogue input 2
3 RM_CLK Remote clock
4 RM_DAT Remote data
C3140690010-A1-TCU12_Mounting_Specification.odt LDL Technology SAS – Toulouse – France 5/ 13
Copyrights 2016