Ref : C3140690010 Version : A4 Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Diffusion : Internal Status : Confidential External Limited ✘ Extended ✘ Mounting procedure TCU 1.2 Reference : C3140690010 Version A4 Internal Approval Author Name and Department Date Approver Check D. LUCE (MD) 11/03/2019 D.ALLIOT (SYS) P.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 MODIFCATION LIST: CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Version Chapter / pages Comments Author A0 Modification date 22/12/2016 All Creation D.LUCE A1 03/05/2017 §4 §5 §6 §7 & §9 D.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Chapter : 1. PURPOSE................................................................................................................................. 4 2. TCU 1.2 PRODUCT DESCRIPTION.........................................................................................4 2.1.
Ref : C3140690010 Version : A4 Mounting procedure TCU 1.2 1. PURPOSE CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. This document is the Mounting procedure of the TCU 1.2. TCU 1.2 is a part of a Tire Pressure Monitoring System. The Telematics Control Unit (TCU) collects information on the vehicle and transmits it over the GSM network to a back-end server.
Ref : C3140690010 Version : A4 Mounting procedure TCU 1.2 3. MAIN FEATURES CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 3.1.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 D0 type 5. TCU 1.2 MOUNTING RECOMMENDATIONS Screws (not provided by LDL) must be tightened @ 4,5 Nm +/-0,5 Nm. It's recommended to use an elastic washer (Belleville type) between screw head and silent block with spacer. Stainless steel is recommended.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. NOk on this side OK Note : on some harness, back shell can be mounted on an opposite direction (rotation @ 180° versus pictures shown on this page) LDL TCU 1.
Mounting procedure TCU 1.2 6. Ref : C3140690010 Version : A4 TCU 1.2 CONNECTION After its connection onto TCU 1.2, cable must be fastened as close as possible of its TCU 1.2 starting point (end of connector base). CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission.
Ref : C3140690010 Version : A4 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 OK NOk Nota Bene : Incorrect wiring should prevent the system to operate properly. ✔ TCU 1.2 has to be connected to +12V or +24V through 5A fuse protection. ✔ To power supply the TCU 1.2, it has to be connected on KL31 (battery negative) and KL15 (ignition). ✔ When TCU 1.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 ✔ The TCU 1.2 must be free from any metallic shield in the Z direction. The antenna should be cleared as possible to optimize RF communication and reduce areas of non-receipt. ✔ There must be a free area of minimum 5cm wide around the TCU in all directions. ✔ TCU 1.
Ref : C3140690010 Version : A4 Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Vehicle axis Truck TCU 12 Trailer TCU 12 MANDATORY TCU 1.2 location: NOTA BENE : Auto localization system mandatory requests a 6 wheels trailer only, without twin wheels 8. RECOMMENDATIONS FOR AUTO-LOCALIZATION The TCU 1.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 Also, the TCU 1,2 must be fixed on the geometrical center of the rear axles , as close as possible of the central wheel axis. Locating tolerance is about +/- 20 cm Orientation of the TCU 1.
Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 9. Ref : C3140690010 Version : A4 FCC/IC REGULATORY NOTICES 9.1. MODIFICATION STATEMENT LDL Technology do not approve any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 C3140690010-A4-TCU12_Mounting_Specification_MOD.
Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION FCC CLASS B DIGITAL DEVICE NOTICE This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 9.4. Ref : C3140690010 Version : A4 10. GENERAL ADVERTISING / CONSIGNES GENERALES Lors de l’installation du système: • Respecter les consignes de sécurité du constructeur du véhicule.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 • Ne pas plier les câbles, éviter tout effort de traction sur les câbles lors de leur pose, ne pas les poser sur des arêtes vives, respecter un rayon de courbure supérieur à 15 cm. • Ne pas installer les câbles dans une zone de pièces en rotation, en mouvement et très chaudes.
Mounting procedure TCU 1.2 CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. 11. Ref : C3140690010 Version : A4 APPENDIX TCU 1.2 interface dimension, see drawing below ref. 2160620000 C0 or D0 C3140690010-A4-TCU12_Mounting_Specification_MOD.
CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission. Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 ATTENTION Il est recommandé d’utiliser les perçages disponibles sur le véhicule pour fixer le support.
Mounting procedure TCU 1.2 Ref : C3140690010 Version : A4 LE BOITIER NE DOIT PAS ÊTRE RECOUVERT DE PEINTURE, VERNIS OU DE REVÊTEMENT TYPE BLACKSON, CECI AFFECTERAIT LA RESISTANCE MECANIQUE DU BOITIER ET PERTURBERAIT LA QUALITE DE LA TRANSMISSION DES DONNEES; CONFIDENTIAL INFORMATION This document is the exclusive property of LDL Technology. No content may be transmitted or reproduced in any form without written permission.
