User manual

Layout-Light-Control Light-DEC – Manual
- 12 -
Depress at the Main Menu the key BELOW
several times shortly until the menu step start
options will be indicated:
Open the menu start time with the key RIGHT.
Adjust the required hour for the start time with the
keys ABOVE or BELOW:
After adjusting the required hour depress the key
RIGHT for the adjustment of the minute:
Adjust now with the keys ABOVE or BELOW the
minute for the start time:
After adjusting the required minute depress the
key LEFT several times until after a warm start the
operation display indicates the new start time:
6.1. Selecting start options of the light control
Ex-factory the start properties have been set to “Always active”. This adjustment
will start the Light control Light-DEC at the adjusted time and as soon as power
will be supplied.
For the Start options are two further possibilities available: The Light control can
be manually started or stopped with a push button or switch or digital with a DCC-
Address.
Via the menu step Start options will be the Start properties for the running day of
the Light-control Light-DEC selected.
Depress at first the key RIGHT longer than three seconds. The display will change
into the Main Menu and all light sources will be switched off.
Depress within the Main Menu the key BELOW
shortly several times until the menu step Start
properties will be indicated:
Open now the menu Start options with the key
RIGHT:
If required change the Start time as described at
section 6 or depress the key RIGHT two times
until the menu step Start properties will be
indicated.
---Main Menu----
Start options
Start time
}
22
{ : 30
Start time
}
13
{ : 30
Start time
13
: }30{
Start time
13
: }45{
Light-DEC VX.X
13:45:00 T 300
---Main Menu----
Start options
Start time
}
22
{ : 30
Start property
>
Always a
c
tive
<