User manual

Layout Light Control Light-DEC – Technical Manual
- 3 -
Start time
}hh { : mm
Start time
hh : }mm {
Start property
> Always active <
Start property
>DCC-Address<
Start property
>Button/Switch<
Start property
DCC-Address:----
Start property
Ext. Button: -
Currently stored external
Button/Switch is displayed.
The new external
Button/Switch will be
displayed after pressing.
Currently stored DCC-
Address is displayed.
New DCC-Address will be
displayed after receiving.
---Main Menu----
Start options
The entry is set depending
on the adjusted property.
Values in cu
rly braces can be
edited step by step with the
buttons UP and DOWN. If
one
of the two buttons is held
for
longer than 2 seconds, the
values will automatically
continue until the button is
released.
---Main Menu----
Light-Modules
Module position
No.: >x< = LxM
Module position
No.: x = >LxM <
Select:
LPM for Light-Power-Module
LDM for Light-Display-Module
---Main Menu----
Lightsource test
Lightsource test
Light-Module: >x<
Module: X = LxM
Output : >x<
Values between a
larger and smaller
sign can be edited
step by step with
the buttons UP and
DOWN.