User manual

Layout Light Control Light-DEC – Technical Manual
- 11 -
5. Description of the available light functions
Light function Description Adjustment Outputs
Railway cross
Typical light flashing on railroad crossing with two synchronous contrary
switching outputs.
Switch time
Light overlap (ON/OFF)
2
Flash light
Generates ON- and OFF-times with simultaneous duration. With little variances
of flash sequences on each flash-light and each start.
Switch time
Variance
1
Run light 4
Four outputs switching successively ON for a certain time.
Speed 4
Run light 5
Five outputs switching successively ON for a certain time.
Speed 5
Signal post
One output each for the control of LED`s or incandescent lamps in red, yellow
and green creating light effects as on a panel of a signal post.
-
3
Television
Three outputs for red, green and blue creating continuous changing color-, flash-
and flickering effects as on a TV-set at random.
-
3
Lamp
Switches one light source ON or OFF at random.
Break time over House light 1
Entrance hall
Switching-ON and OFF at random. The switched-on time is much shorter than
the off-time. This allows a simple configuration for floor and staircases.
Break time over House light
1
House room
Switches ON or Off at random. The switching time varies on each switching
process. This makes a simple configuration for residential houses possible.
Break time over House light
1
House light Delay of switching by several seconds at random. Therefore will be at the same
switching time e.g. the illumination of houses on one complete street switched
ON and OFF at different times.
Break time over House light
1
Neon light At first after switching-on irregular flickering at random. Will be remain switched
on.
Switch time 1
Fireworks1 The first output switches permanently ON for a short time. Following the second
output will be flickering. The timing will vary and overlap.
Break time 2
Fireworks2
The first output will flicker for a short time. Following the second output will be
switched permanently ON. The timing will vary and overlap.
Break time 2
Fireworks3
Initially the first output will be flickering for a certain time. Following the second
output will be flickering. The timing will vary and overlap.
Break time 2
Ran. Fireworks
Switches fire work at random 1, 2 or 3. -
2
Funfair1 to 8 8 different effects for fun-fairs. As well for advertising signs or others. The speed
can vary.
-
8
Random Funfair
Switches light at random for fun-fair 1, 2, 3, 4 , 5, 6, 7 or 8. -
8