User manual

Layout-Light-Control Light-DEC – Manual
- 18 -
With the keys ABOVE or BELOW you can now
select the light-function whose parameter shall be
changed.
For changing e.g. the speed of the light function
Run light you have to activate the key RIGHT.
Indicated will be the actual value:
With the keys ABOVE and BELOW you can select now the value for the Run light
speed suitable for your application. In accordance to the table “Light options:
Parameter of Light functions which can be individually matched” can be a value
between 50 and 5000ms within 50ms steps adjusted.
If the suitable value will be indicated you can leave as usual the adjustment options
with the key LEFT.
To match individually the parameters of other light functions you should follow the
menu navigation at the Technical Manual.
10.1. Light adjustments: traffic light pedestrian, traffic light
cross road, traffic light circuit
Light-DEC offers two light-functions for traffic-light circuits. With the light-function
traffic-light pedestrian (at the display indicated as shortcut: >Traffic l. ped<) will be
traffic-lights pedestrian realized. The options traffic-light cross-road (display:
>Traffic l. c<) offers the phases of road- and pedestrian traffic lights for cross-
roads and intersections.
Some phase times can be separately individual matched for both light functions at
the menu Light adjustments under >Traffic l. ped< and >Traffic l. c<.
Two country specific features can be adjusted via the Light adjustment >Traffic. l.
opt.< as described at the graphical menu navigation at the Technical Manual.
With the first setting can be defined if the traffic light shall switch from RED to
GREEN via YELLOW (>Via RED+YELLOW<) or directly from RED to GREEN
(>Directly<).
At the second country specific setting can be via the option GREEN flashing selected
if GREEN shall flash before the traffic light switches to RED or if the switching will
be without flashing directly from GREEN to RED.
The selected adjustments will be active for both light functions of the traffic light
circuits.
At night will be the traffic-light circuits generally switched off. For this time can be
the night-function individually activated for “YELLOW flashing”. The road light of
the traffic-light pedestrian or the road-light of the side street will flash then at night.
Particulars can be found out at the chapter output function.
Light options
>Run light<
Speed
} 200 { ms