User manual

Layout-Light-Control Light-DEC – Manual
- 1 -
Content: Page
1. Introduction / Safety Instruction 2
2. Connect the Basic-Module to the first Light-Module 3
2.1. Using further Light-Modules 4
2.2. Connect light sources to the Light-Modules 5
3. Connect push-buttons or switches to the Basic-Module 7
4. Connect the Basic-Module with the digital layout 7
5. First starting-up / selecting language 8
5.1. Register external push-buttons or switches 9
5.2. Register used Light-Modules at the Basic-Module 10
5.3. Light source test 11
6. Adjusting start time for day-sequence of the light control 11
6.1. Selecting start options of the light control 12
6.1.1 Start/stop of Light-DEC via external push buttons/switches 13
6.1.2 Start/stop of Light-DEC via DCC-Addresses 13
7. Day-phases: select start timing and time-factors for daybreak,
day, dusk and night 14
8. Setup of switch groups and switch times 15
9. Available light functions 17
10. Light adjustment: individually matching of parameters of
light-functions 17
10.1. Light adjustments: traffic light pedestrian, traffic light
cross-road, traffic light circuit 18
11. Output function: assign light functions to the output of
light-modules 19
11.1. Output function: properties always active 20
11.2. Output function: properties switch group 20
11.3. Output function: properties push button/switch 21
11.4. Output function: properties DCC-address 21
11.5. Output function: night function for traffic light pedestrian
and traffic light cross road 22
12. Factory setting 22