Installation & Assembly

Before integrating your lid,0read carefully this instruction0

manual.

For0any questions,0please contact0us0at0:0contact@legriddle.com

Not$for$cooking.$Always keep open$

your LID$when LE$GRIDDLE$is on.

1- The0handle:

With the020M40screw and0the020washers,0fix the0handle at the0

front0of0the0lid

LID0Integration

GF-LID

PAGE 1
LID Integration GF-LID Before integrating your lid, read carefully this instruction manual. For any questions, please contact us at : contact@legriddle.com Not for cooking. Always keep open your LID when LE GRIDDLE is on.
PAGE 2
- The hinges Identify the left and right hinges LEFT HINGE RIGHT HINGE Position the hinge at the back left of the griddle, put the 2 washers and Nut and tighten them. Position the hinge at the back right of the griddle, put the 2 washers and Nut and tighten them.
PAGE 3
- The lid Put the LID on the Griddle, the hinges must be inside the lid. To set the lid on griddle,push sides away. So that lid must be assembled with strengh Tighten the screws M6 and M8 at the back of hinges for the left and right side.
PAGE 4
FOR BUILT IN AND TROLLEY USING YOU MUST ADD LEGRIDDLE THICKNESS SHIM 1-place the shim uner the griddle edge 2- make 2 x 2mm holes with a drill 3 – fix it with the 2 countersink screw supplied Do the same for left and right Side Not for cooking. Always keep open your LID when LE GRIDDLE is on.