User's Manual

- 20 -

CH6. CONNECTING

Connect to the Internet

Your tablet’s networking capabilities allow you to access the Internet through Wi-Fi.

Wi-Fi

To use the Wi-Fi function, you would need to access a wireless access point or hotspot.

Turn on Wi-Fi and Connect to an Access Point

1. Press Applications , press Settings , and then press Wireless & networks, touch Wi-Fi to

turn it on or turn it off.

2. Touch Wi-Fi settings to view all available access points that were shown and displayed in the list under the section of Wi-Fi networks.

3. Select the one you wish to connect to and enter the password if required.

4. Touch Connect to connect the wireless access point.

Add a New Wi-Fi Network

1. Press Applications , and then touch Settings .

2. Touch Wireless & networks, turn on the Wi-Fi and then select the Add Wi-Fi network that was at the button of Wi-Fi networks.

3. Enter the network SSID and select the security.

Location & Security

1. Open: No security.

2. WEP: Wired Equivalent Privacy. Note: A passphrase is required.

3. WPA/WPA2 PSK: Wi-Fi Protected Access.

**Note: A password is required.

4. 802.1 x EAP: 802.1x Extensible Authentication Protocol.

Fi Settings