User's Manual

2. When the power is turned on, the LED indicator will turn on in white color
for 3s then turn off to show that the wireless charger is ready for use.
3. Place your wireless compatible device rear down onto the charger. When
detected and positioned correctly the indicator will switch the white LED on a nd
begin to charge your device.
4. When charging is complete remove your device and the LED indicator will turn
off.
Notes:
Correct Operation: Use only for the purpose the product was designed. Misuse may
cause fire, explosion or other dangers.
Appropriate Devices: Use only Approved AC power adapters with this device as
inappropriate current may cause lower than expected charge rates.
USB Cable: The cable supplied with this wireless charger provides appropriate
current and connectivity.When using a higher input current, please use an
appropriate cable rated higher than 2.0 Amps.
Cleanliness&Use: Ensure that the charging platform is clean at all times.Sensitive
equipment and other non‐metals or electromagnetic items should not be placed on
the charging base.
Overheating: If this should occur,please turn off the power to the charger and allow
it to cool before attempting to charge again.
Misuse&Tampering: Keep device dry.Do not store or operate in extreme
environments. Do not attempt to open, throw,hit or s hake this device.
Sensitive Electronic Devices:
Manufacturers recommend keeping a minimum distance of 20cm between a
wireless charging device and other sensitive devices.If there is any reason to suspect
that interference occurs, please turn off the power immediately.