User Manual

110 mm
90 mm 90 mm 90 mm 90 mm
1. Do not expose this product to rain or damp conditions.
2. Prevent this ítem from falling as it could cause serious damage.
3. Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
4. In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
5. Clean it with a dry cloth.
6. Do not place this ítem near sources of heat or expose to direct sunlight.
7. Do not insert any metal objects into this device as there is a risk of causing a short circuit in
the unit.
8. To avoid risk, do not place any metal objects between the charger and the mobile device
during the charging process.
9. Do not use mobile devices with a metal case.
10. Keep out of reach of children.
Magnetic Wireless Charger
User manual
Product Overview:
Specifications:
Charging area
Indicator Light
USB
Instruction sheet
1
2
3
4
4
It is recommended to read this user manual
carefully and keep it for future reference.
Input: 5V 2A, 9V 2A ,
Wireless Output: 5V 1A, 9V 1.1A,
Working distance: 6mm
395340 ITEM: AB0297
Magnetic alignment suitable for compatible devices only.
Suitable for all mobile devices with Qi technology.
1. Connect the cable into a USB port or into a USB AC adapter.
2. Put your Qi compatible device on top of the wireless charger, ensuring that it is
face up and centrally positioned.
3. When the wireless charge is working correctly a white light of the USB connector
will light up.
Note: If your phone has a protective case you may need to remove it for a successful
connection when using the wireless charger.
Operation:
Warnings:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This device generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment
FCC statement
The distance between user and products should be no less than 20cm