User's Manual

1.0 Setting Up
20
THE REAR OF THE CRADLE:
1. RCA/AV connectors
Used to connect to the Audio/Video Input/
Output Jacks on a television.
2. Ethernet port
Insert a RJ-11 cord into the jack to connect
the unit directly to the internet.
3. Telephone jack
Insert a telephone cord connected to the MVP
to connect it to home alerting light systems.
4. 12 Volt input
Insert the 12-volt cord into the input to
recharge the MVP. The 12-volt cord may also
be used to power the MVP through the cradle.
5. Stand
Gently ease the bottom of the stand to extend
the stand to a 45-degree angle so the cradle
may stand on its own.
6. Recessed hanging slots
May be used to hang the cradle from a wall.
Make sure the cradle is properly secured.