amor H1 Heart Rate & Activity Recorder Manual Rev. 1.01 Model No: 8Z31 Leadtek Research Inc.
Table of Contents Page Table of Contents........................................................................................ ii 1.User Guide............................................................................................... 1 2.Warnings and precautions ....................................................................... 1 3.Brief introduction of amor H1................................................................. 2 3.1 Device outlook and I/O...........................................
1.User Guide amor H1 is a personal and portable health device that allows users to measure and record heart rate and activity value, giving users more efficient feedback and record parameters displayed in Mobile APP. The input of heart rate signal is obtained through adhesive electrode patches, Activity data is record daily movement via clip at the waist.
systems. Portable and mobile wireless communications device (RF, radio frequency) maybe affect the amor H1. The amor H1 Life of one year. To ensure the life of the machine, please note that the use of maintenance. 3.Brief introduction of amor H1 3.1 Device outlook and I/O 2 1 3 5 1. Button 2. OLED Display 3. Buzzer Hole 4. 2.5mm Plug connector 5.Clip 4 3.2Parameter Relevant parameter values are defined as follows. 1.Exercise Target。 2.
4.Specification 4.1Heart Rate Input impedance：>10M Ohm CMRR：>60 dB Input dynamic range：+/-2 mV Analog / Digital Converters： 12 bit ECG signal：1 Lead; Sampling rate：250Hz; Measuring frequency：0.33-40Hz; Heart rate measurement range：40-240 bpm 4.2Activity 3-axis G-sensor, plus or minus 2G 4.3Input 2.5mm phone jack Signal cable (with electrode pads used) 4.4Output BT4.0 BLE 4.5Display OLED display (mono) 4.6Appearance Size：60*38*9.5(mm); Weight：39g(With battery) 4.
Storage and transport temperature：－13oF to＋158oF /－25 oC to＋70oC Operating Relative Humidity：15 to 93% (non-condensing) Storage and transport conditions relative humidity ： 15 to 93% (non-condensing) Atmospheric pressure range：700 hPa to 1060 hPa 4.9Power Information The device uses 135 mah lithium battery 4.10 APP System Requirements Android System: 4.3or later iOs System: iphone 4Sor later Hardware Requirements: MCU: RAM: 1GB or more Capacity: 2GB or more Quad core 1.3GHz and above 4.
5.Operation 5.1 Appearance OLED Display Long push the Button :On/Off Short push the button: change Interface Fig.1:Top view 2.5mm hole (for connecting HR cable or charging cable) Fig.
Buzzer hole: Notice alert Fig.3:I/O Interface 5.2 Device screen instructions Press the device, there will be 1)Time;2)Achievement rate;3)Steps;4) Calories;5)Heart Rate;6) Exercise Time. From 1) to 6) is cycle display, But stay ten seconds on each picture off the screen, shown in Figure 4. 1) 2) 3) 4) 5) Fig. 4: amor H1 main function Flow 6) 5.3Operation From Fig.1 to Fig.
appear, the device signals the next hole left there, this input wire or charging cable to ECG use. Before use, the first patch fixed on the chest, connect the signal line deduction (about color and text segments). Finally, the product clip fastened at the waist and connected to cable, you can start using. Signal wire and electrode patches affixed to the suggested location, shown in Figure 5. Fig. 5: The suggestion position of electrodes The right for the R white, left for L Black.
Fig. 6: amor H1use position and related picture When the end of the exercise, or do not use heart rate function, unplug the wire thread first, and then removed the electrodes from the body. After removing the Heart Rate Cable, the device can still record activity and other applications. When the device is at low battery condition(battery symbol one grid), suggest to charging. There will be a percentage of the charging battery while charging.
6.2 App Introduction Amor Runner App can be downloaded from the product web(health.leadtek.com)or from Google Play Store，App including below items: 1.Login 2.Data overall view 3.Sync 4. Data Display 5.Autonomic nervous system measurement 6.Setting 7.Share 6.3 Maintenance 1. When the low-voltage display symbols, please charge Immediately. 2. When measuring signal is weak, the proposed replacement electrodes. 3.
6.
8.Technical Support and Warranty 8.1Technical Support If you can not resolve your problem, please contact your dealer. You can also contact us through the following technical support staff, information is： 1.TEL：+886 (02)82265800#810 2.ADDRESS:18F, Chien-Yi Rd., Chung Ho Dist., Ne 23511 8.2Warranty Policy Leadtek Research Inc. provides one year warranty, starting from the purchasing date, to the original purchaser for repairing any product failure due to fabrication error or defective parts.
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
