User's Manual

36
Check Network Connection
Determine your IP address and network settings, please following the procedures.
1. Click on ¡Start¡  ¡Run¡ and type in: ¡cmd¡ and then press ENTER
2. In the MS-DOS window, type in: ¡ ipconfig¡ and then press ENTER
3. That will display your network card IP Address, Subnet Mask, and Default
Gateway.
4. You may use following instruction to modify network settings.
 Click Windows ¡Control Panel¡ ¡Network
Connection¡  ¡Local Area Connection¡ ,
right-click on the icon and choose
Properties.
 Choose ¡ Internet Protocol (TCP/IP)¡, and
click Properties button.
 Choose ¡Use the following IP address¡,
and type 192.168.0.X as IP address. The
Subnet mask is 255.255.255.0, then click OK.
APPENDIX