User's Manual

39
Q: I cannot access the Network Camera from Web browser !
A:
1. Please use the command ¡PING¡ to check the network connection. If the shown
response is ¡Request timed out¡, it may caused by the incorrect setting of IP
address.
2. Observe the Ethernet LED from the Network camera. It should be steady blue if
with a correct IP configuration. If not, check if both ends of the Ethernet cable are
well and properly attached.
3. Confirm that Network Camera¡s virtual/local IP address and ports have been
forwarded properly so that the browsing from internet can be successful. Please
refer to your camera HTTP port settings or router¡s user manual for detailed
configuration.