User's Manual

- -

4 Operation

4.1 Hardware Description

The Bluetooth GPS has two LED light which each has two colors. One is GPS & Charge status LED,

that is named LED 2, and the other is Bluetooth & low power status LED, that is named LED 1. The

status table of LED shows as follows:

LED1

BT & Low Power LED Description

LED1 Color and Action Bluetooth Active Low Power

Blue Flash Yes No

Purple–Red Flash Yes Yes

LED2

GPS & Charge LED Description

LED2 Color and Action Battery Charged Position Fixed

Dark No No

Green Flash No Yes

Orange Yes No

Orange-Red Flash Yes Yes

4.2 Turn on/off

Turn on To turn on the receiver, press the power button on the topside

briefly (0.5 seconds). The right LED(LED 2) indicator will flash

briefly. The left LED(LED 1) indicator will start flashing. Note:

When the Receiver is in the cradle, it will switch on when power

to the cradle is switched on (to synchronize with vehicle ignition).

Turn off To turn off the receiver, press the power button on the topside for

3 seconds. The LED indicator will flash briefly before switching