User's Manual

- -

Bluetooth operation.

Turn on To turn on the receiver, please switch the power slide switch to

“ON” side. You can see the LED1 flash blue color once and wait a

moment (about 10 seconds) to turn on the power. At the same time

LED1 will flash blue to wait Bluetooth connection.

Turn off To turn off the receiver, please switch the power slide switch to

“OFF” side. You can see the all LED dark.

4.3 Charging

Low Power The left LED(LED 2) indicator will show red when Lithium-Ion

battery power becomes low.

Charging The left LED(LED 2) indicator will turn green when the battery is

being charged. When fully charged, the green indicator will switch

off.

4.4 Bluetooth Communication

Waiting to connect The right LED(LED 1) indicator will flash if there is no

communication between the receiver and another device.

Connected The right LED(LED 1) indicator will turn to continuous lighting

when the receiver is connected through the wireless link with

another device.

4.6 PIN CODE

The PIN code means Personal Identification Number for Bluetooth device. The

Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generally speaking, there are two

steps in Bluetooth connecting. One is pairing process, the other is link process. If you need PIN code

to pairing and connect, you can use the default pin code, “0000” to connect Bluetooth device. Our

GPS receiver belongs to non-safety connecting, you can use in general application to finish

connecting.