Installation Guide
Table Of Contents
9
The leakSMART
®
Valve is a patent-pending, wireless, motorized brass water
ball valve that connects directly to a home’s main water supply. Professional
installation is strongly recommended to ensure proper operation and
reliable water damage prevention.
• The leakSMART
®
Valve may only be installed in homes with an existing
main water shutoff
• To avoid any injury, never place your fingers inside the valve
• Do not grip plastic motor drive for leverage when installing the valve
• Do not install on fire suppression systems or fire sprinkler water lines
• Indoor use only
Please note:
leakSMART
®
Professional Installation Steps
1.
2.
3.
4.
Ensure that you have all necessary leakSMART
®
Valve components
and fittings required for installation:
• leakSMART
®
Valve (3/4” FIP x 3/4” MIP), (1” FIP x 1” MIP) or
(1-1/4” FIP x 1-1/4” MIP)
• AC power adapter with 18 ft. reach
• 4 AA Alkaline batteries (provided)
To protect the valve cover from possible damage, remove it by
sliding it away from the valve, and keep it off until you’ve completed
installation.
Shut off the main water supply valve.
Open both hot and cold handles on the faucet nearest the
valve to relieve water pressure.