Installation Guide

8
Manual Operation of your leakSMART
®
Valve:
In the event of repeated error messages from your smart home system that the valve is
not automatically opening and closing, the valve may be manually opened or closed.
1. Unplug the AC power cord from the
valve cover.
2. Remove the cover from the valve.
3. Use a marker to draw a line across one
side where the upper and lower motor
housing connects, so when the motor is
removed, you’ll know how to reposition
it for assembly.
4. Remove the 4 screws using a Phillips
head screwdriver.
5. Place your thumb and finger on the
plastic gear and rotate clockwise to
open the valve or counter-clockwise
to close it; do not use tools to manually
open or close the valve.
leakSMART
®
PRO
Manual Operation Steps
Open
Close
Shown in
closed position