Instruction Manual This guide contains important information. Please save it for future reference. IM-616003-001 ©2022 & TM Spin Master Ltd. All rights reserved.
INTRODUCTION Thank you for purchasing the PAW Patrol: To the Rescue! Learning Video Game! Go on missions with the PAW Patrol to save Adventure Bay and learn problem-solving skills along the way! Home Button Help Button D-Pad B Button A Button Micro USB Power Cable HDMI Game Stick Wireless Controller Power Switch INCLUDED IN THE PACKAGE • • • • 1 wireless controller 1 HDMI game stick 1 micro USB power cable Quick Start Guide WARNING All packing materials such as tape, plastic sheets, packaging locks,
GETTING STARTED Initial Setup 1. Plug the USB B Connector end of the Micro USB Power Cable into the USB B port on the HDMI Game Stick. 2. Plug the HDMI Game Stick into an HDMI port on your television. 3. Plug the USB A Connector end of the Micro USB Power cable into a USB port on your television. 4. Make sure your television is set to display the same HDMI port that the HDMI Game Stick is plugged into. 5.
IMPORTANT: BATTERY INFORMATION • • • • • • • • • • • • Insert batteries with the correct polarity (+ and -). Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries. Only batteries of the same or equivalent type as recommended are to be used. Do not short-circuit the supply terminals. To save battery power, turn off the controller when it is not in use. Remove batteries during long periods of non-use. Remove exhausted batteries from the toy.
Disposal of batteries and product The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health. The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.
Safety information when using power supply for toys LeapFrog recommend a power supply (AC/DC adaptor) of the below specification: Power rating: 5V/500mA or 5V/1A DC output • Use Leapfrog or any standard adaptor that complies with EN61558 • This toy shall only be used with a power supply for toys. • The power supply is not a toy. • This toy is not intended for use by children under 3 years old. • Do not connect the toy to more than the recommended number of power supplies.
3. Help Button • Press the Help Button on the Wireless Controller to hear hints and tips on how to play the game or navigate the Menu screen. 4. A Button • Press the A Button on the Wireless Controller to select the highlighted objects on the Menu screen. • See Games section below for A Button usage in individual games. 5. B Button • Press the B Button on the Wireless Controller to return to the previous Menu screen. • See Games section below for B Button usage in individual games. 6.
Mission Menu Screen • Access the different missions from the Mission menu screen. • The player will need to get one star in each game in a mission before the next mission is unlocked. Game Menu Screen • Select a pup’s game within a specific mission. • Stars earned during gameplay will display below each game’s icon. Quick Challenge Menu • Access the games featuring learning curriculum by selecting one of the three icons on screen associated with each curricular game. 7.
• Fixing hydrants adds time to the timer. • Complete all the mission actions in a level before the timer runs out to complete the game. Mission actions are pictured at the top of the screen. • Follow the arrows on screen to the next mission item. Rubble • Press the D-Pad left and right to highlight different Rubble dance poses. • Press the D-Pad up and down to change Rubble’s costume. • Press the A Button to select a highlighted image of Rubble as your answer.
8. In-Game Items The following in-game items appear throughout the game. Pup Treats • Players can collect Pup Treats in every mission. • When a game in a mission is completed, stars are rewarded based on the total number of Pup Treats that they have collected. • A game can be completed multiple times using a saved profile. Each completion will present the player with a new star score, but only the highest score will be saved.
3. Remove the batteries if the unit will not be in use for an extended period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water. 5. Always keep the Wireless Controller and HDMI Game Stick away from water. 6. Examine the Micro USB Power Cable regularly, checking for damage to the cables, plugs and other parts. Do not use a third party adapter. Do not use the Micro USB Power Cable if there is any damage.
OTHER NOTES Static electricity may cause the HDMI Game Stick to malfunction. In cases where the HDMI Game Stick is malfunctioning due to static electricity, disconnect the Micro USB Power Cable, wait for 10 seconds, then reconnect the Micro USB Power Cable to reboot the HDMI Game Stick. DECLARATION OF CONFORMITY Hereby, Leapfrog, a division of VTech Electronics Europe Plc, declares that the radio equipment type 6160 is in compliance with The Radio Equipment Regulations 2017 (2017 No.1206).
CONSUMER SERVICES Creating and developing LeapFrog® products is accompanied by a responsibility that we at LeapFrog® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
Visit our website for more information about our products, downloads, resources and more. leapfrog.com Read our complete warranty and privacy policies online at: leapfrog.co.uk/warranty www.leapfrog.com/en-gb/legal/privacy LeapFrog Enterprises, Inc., a subsidiary of VTech Holdings Limited. TM & © 2022 LeapFrog Enterprises, Inc. All rights reserved. Printed in China.
