Instruction Manual

4
When prompted by the website, connect the Cable in
Scout’s/Violet’sbatteryboxtothe3.5mmheadphonejack
or adapter on your smartphone, tablet or computer. Do not
plug the Cableintoperipheralorexternalaccessoriessuchas
speakers, docks, etc. Follow the instructions on the website to
begin the download.
Step 3
When personalisation is complete, disconnect the Cable from
your device and tuck the Cablebackintothebatterybox.
Closethebatteryboxdooranduseascrewdrivertotighten
the screw to secure. Close the hook-and-loop fastener over
thebatterybox.
BATTERY INSTALLATION
1. MakesuretheunitisturnedOff.
2. Find the battery cover located
on the back of the unit, use a
screwdriver to loosen the screw,
and then open the battery cover.
3. Remove old batteries by pulling
up on one end of each battery.
4. Install 2 new AA (LR6/AM-3)
batteries following the diagram
inside the battery box. (For
best performance, alkaline
batteries or fully charged Ni-
MH rechargeable batteries are
recommended.)
5. Replace the battery cover and
tighten the screw to secure.
WARNING
Adult assembly needed. Close the battery door and tighten
the screw to secure before giving your child the toy.