Instruction Manual

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,

please follow these steps:

1. Turn the unit Off by using the On/Off/Volume Control

Switchonthebatterybox.

2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the

batteries.

4. Turn the unit On by using the On/Off/Volume Control

Switchonthebatterybox. The unit should now be ready

to use again.

5. If the unit still does not work, install a brand new set of

batteries.

Environmental Phenomena

The unit may malfunction if subjected to radio-frequency

interference. It should revert to normal operation when the

interference stops. If not, it may become necessary to turn the

power Off and back On, or remove and reinstall the batteries.

In the unlikely event of an electrostatic discharge, the unit may

malfunction and lose memory, requiring the user to reset the

device by removing and reinstalling the batteries.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services

Departmentat01702200244intheU.K.oremailsupport@

leapfrog.co.uk. Creating and developing LeapFrog

products

is accompanied by a responsibility that we take very

seriously. We make every effort to ensure the accuracy of the

information,whichformsthevalueofourproducts.However,

errors sometimes can occur. It is important for you to know

that we stand behind our products and encourage you to

have. A service representative will be happy to help you.