Owner's manual

PAGE 1
PAGE 2
Product Compatible Firearms MTU020SSA, MTU026SSA, all SSA and SSAD versions ArmaLite AR10 & Variants MTU020SSB, MTU026SSB, all SSB and SSBD versions DPMS LR-308 & Variants MTU020SSC, MTU026SSC, all SSC and SSCD versions S&W M&P10, DPMS Low Profile LR-308 & Variants
PAGE 3
PAGE 4
Caution: Make sure firearm is not loaded. Remove magazine and examine chamber. Use safe handling procedures at all times. Take-down Pins Note: Max. torque value for installing barrel nut should not exceed 60 ft/lb.
PAGE 5
Note: Max. torque value for installing barrel nut should not exceed 50 ft-lb.
PAGE 6
2 lb 2 0 in- 5 in-lb