Length 2” (50.8mm) Weight with Batteries 3.5oz (100g) Battery/Qty CR2 X 1 (3V) Pressure Switch Included Mount/Ring Integral Mounting Deck Battery Operating Time 45mins for Dual Operations Bulb Type R2 23mm LED IRB* Voltage 3V Max. Output 120 lumens Focus Preset Control & Adjustment TS & 3 Points Beam Movement 8"@50yds Type CLASS 3R (Consistent in All Operations) Output Power 2.5~3.1mW Wavelength 630~640nm Beam Diameter 1”@20yds, 75-79°F Operating Temperature 15~100°F (-9.
LASER APERTURE LASER LIGHT AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT RED 635nm <5mW CW LASER 60825- 1: 2007 & AS/NZS 2211 . 1 : 2004 Complies with FDA performance standards for laser products except for deviations pursuant to Laser Noticewith No. 50, dated June 24, 2007 Complies FDA performance standards www.leapers.com for laser products, dated June 24,2007 Livonia, MI ! The purpose of this diagram is to provide a better understanding of the structure of the Flashlight (and Laser) System.
Note: Pressure Switch will only work when the light, the laser or both have been “activated” by pressing their Push Buttons first. ! Do not over tighten the Cross-bolt Locking Knob as you could cause damage to the main body. Note: Always use the Push Buttons to turn off the light/laser FIRST before using the Operation Selector to shut off the unit.
TARG ET ET RG TARGET Impact Point Movement Instruction W/E Adjustment Windage Elevation Adjustment Screw Positions (From Rear of Laser) Bullet Impact Point Movement TA
Replacement Parts Contact your distributor for information: BAT-LIT880 1PC Set of CR2 Lithium Battery Pressure Switch
