User Guide

PLA Series Operating Manual
3-8-4 Settings
-31-
1. Setting of interval time
Click the pull-down menu of the tool list under ”waveform window”. The
setting is coming out an interval of a scale on the picture. After completion
of setting, it will display corresponding sampling frequency use in the left
corner.
2. Setting of memory depth
After completion of setting completion, it will show the memory depth by
corresponding use at the left corner.
In the case of bigger memory depth and lower sampling frequency, it takes
longer time to capture data. In such case, “Auto” option could be selected
to enable automatic setting of memory depth for faster data capture.
After nishing the setting, it will show the memory depth by
corresponding use at the left corner.