User Guide
LA-series Operating Manual
Please make sure of the fuse specication if backup fuse is required:
●
Fuse: 250V/2Amp.
●
Another kind of fuse may be added into the fuse holder.
Note! the fuse shall be procured and replaced based on the specications,
otherwise the instrument may be damaged.
2-4 Utilization of Backup Fuses
2-5-1 Connection sequence of LA system
(1)LA unit ->(2)signal capture box(including color cable) ->
(3)signal detection cable->(4)signal capture hook
System connection diagram is as follows:
2-5 Connection of LA System
* Note! don’t place the signal detection cable directly onto the port of LA in
order to avoid damage of LA.
* Send to the factory for repair or replacement in the case of breakup or
damage.
-7-