User Guide

LA-series Operating Manual
1. Insert one end of power cord into AC-in
at left of LA, And the other end into
AC power socket.
2. Press "1" of AC power switch and
change to "1" from "0".
3. Press again orange power control switch
at right upper side of LA front panel,
the red LED is highlighted. Once upon buzzering one time, LA starts
self-test, and enters into the following initial display, indicating the
completion of startup test.
2-6 Startup Test
-9-
← AC power switch
←AC power socket
4. Press the power control switch about 2~3 seconds and then release it, the
system is switched off after data storage.