User Guide

LA-series Operating Manual
-12-
1. Channel setting key:
After pressing the channel keys, 6 functional boxes at right-hand
correspond to F1~F6 function keys. Adjust to preset channel using the
shuttle (whitened location). Functionalities of functional keys:
3-1-1 Menus(item) control keys are described below:
--Channel ON/Off: set ON or OFF of the channels
--Bus: set the bus; the system is available with 16 BUS displays, each
of which has 2 Channel~16 Channel. It’s displayed below after
entering into this mode:
1. Bus
2. Source
3. Objective