User Guide

LA-series Operating Manual
1. Bus: the system is available with 16 BUS, select the intended BUS with
shuttle.
2. Source: source channel. select the intended channel with shuttle
, then put the selected channel into Objective by key.
3. Objective: conrmed channel. If channel is provided, select the intended
channel with shuttle ,then put the selected channel into Source
by key.
* Select the options to be set with orientation key, select Bus by
pressing〝Λ〞, select Source by pressing 〝<〞, select Objective by
pressing 〝>〞.
-Text Mode(numerical mode): select Hex(hexadecimal system) or
Dec(decimal system).
-Reset: clear all CH to be edited in a certain Bus.
-Reset All: clear all Buses that have been edited.
-Move Up: move up CH selected in Objective, as shown below:
Functional descriptions:
-13-