User Guide

LA-series Operating Manual
2. Change page key:
a. Press this key and change to the second page when the number of
channels or Buses on the screen exceeds 16, namely, switch back press
again.
b. The functional page can also be changed by "trigger".
3. Auto-scale key:
Search the captured existing signal waveforms through auto-search by LA,
which are automatically displayed on LCD about 3~5 seconds
*Signals below 10Hz cannot be searched.
4. Cursor setting key:
6 T, A~F 6 vertical cursors are displayed by pressing this key, and the time
interval of A~B,A~T, B~T,C~D,C~T,D~T,E~F,E~T,F~T are displayed
and represented by ns/us/ms.
* Press 〝A←→B〞key, cursor B is displayed as a solid line, and B is at an
enable state;"←" and "->" may shift cursor B, and change the time interval
of B~A and B~T; press 1 time again, cursor C is displayed, and C is at an
enable state;"←" and "->" may shift cursor C, and change the time interval
of C~D and C~T.
* press 〝<〞 key, cursor T is an enable axle, and the screen turns left; press〝
>〞the screen turns right; press 〝Λ〞, the display waveform is at zoom-in
state, press 〝Ⅴ〞, the display waveform is at zoom-out state.
* T cursor display is returned press again the cursor setting key. In such case,
the display could also be turned left, right and zoomed-in/-out along with
four orientation functions of the orientation key.
* Alternatively, the detailed shift of solid cursor could be adjusted by using
the shuttle.
-15-