User Guide
LA-series Operating Manual
1. Conrm if AC power complies with input power of the instrument.
2. Turn AC power switch at left-hand of LA from “0” to “1”, so AC power is
turned on.
3. The red LED indicator is ON press power control switch at right
upper hand of LA front panel. If buzzer gives a "buzz", "system test", etc,
will be displayed on LCD.
4. After completion of self-test, the following is displayed at lower part of LCD:
Press any key to continue . . .
Enter into the operating interface immediately by pressing any key(excluding
power control switch), or halt about 8 seconds.
4-1 Startup of System Power
-27-
Chapter 4 Operating Instructions