User Guide

LA-series Operating Manual
-34-
Pulse width: the external signal pulse width could be set for trigger.
Optional functions of pulse width:
1. CH: select trigger channel (S0~S31): select the measured channel with
shuttle.
2. NAME: display channel name (the names of selected channels are
displayed)
3. LEVEL: set the trigger logic level by selecting〝H〞or〝L〞with shuttle.
4. Selection of trigger condition: ">" (more than), "＝" (equal), "<"(less)
Trigger conditions could be adjusted using shuttle.
5. TIME: setting of pulse width
6. Unit adjustment:〝S〞, 〝mS〞, 〝uS〞, 〝nS〞. These units could be
adjusted using shuttle.
* Every option is changed using 〝<〞 , 〝>〞of , and the settings are
adjusted using , numerical key and "→","←".