User Guide

LA-series Operating Manual
(1) BUS setting display
-66-
A: Channel state;
“Mode”, “name” and “bits in channel” from left to right.
B: Channel/BUS setting zone
C: PORT voltage display
D: Function key
(2) Channel Setting
A: Current state;
This setting is valid only when the channel is BUS.
Bits indicate the quantity of Bit(Channel) in the channel, 1 is single
channel, 0 is shut-off; the others bigger than 1 is BUS.
B: Since "Auto" and "User" modes are valid only when the channel is BUS,
the setting of channel is not affected even if Channel is displayed by
numerical value or selection.