User Guide
LA-series Operating Manual
(3) Bus Setting
BUS or Channel is set by dragging with left mouse button at
Channel/BUS setting zone.
-67-
A: Current state;
Auto represents auto-judgement mode.
User represents user-dened mode.
Bits indicate the quantity of Bit(Channel) in the channel, 1 is single
channel, 0 is shut-off; the others bigger than 1 is BUS.
B: BUS display under Auto mode;
C: BUS display under User mode;
1. Auto mode
Since no arrangement issue exists in Auto mode, it’s displayed by selection;
MSB to LSB is arranged from left to right in this mode.
Switching mode: the mode is switched to "Auto" by clicking "User".
2. User mode
BUS arrangement is user-dened for numerical display. A smaller
arrangement number of BUS indicates MSB, otherwise LSB.
Switching mode: the mode is switched to "User" by clicking "Auto".