User Guide

LA-series Operating Manual
-75-
1. In the case of “Low”, “High” and “Don’t Care", press and hold the left
mouse button on the state, then drag leftwards and rightwards to set
rapidly the trigger state.
2. In the case of “Raising” and “Falling”, press and hold the left mouse
button on the state, then drag leftwards and rightwards to shift the
position of “Raising"and "Falling".
* Note: only “Low”, “High” and “Don’t Care" trigger state can be selected
under Pattern2 and Pattern3. * Either "Raising" or "Falling" can be set
under Pattern1 and Pattern OR.
* Under Pattern2 and Pattern3, the next Pattern is compared only when
the setting state of previous Pattern is already achieved. Trigger is effected
when the setting state of all Patterns is met.
* Under Pattern OR mode, Trigger is effected if either Pattern1 or Pattern
OR state is met.