User Guide

LA-series Operating Manual
-77-
(5) Continuous and discontinuous
A: Click “On” and “Off ” in “Continuous” at right
information column.
* This function is effective only in the case of “
Pattern2” and “Pattern3”.
* If continuous/discontinuous is set as "On", trigger
is effected only Pattern2 and Pattern3 match
continuously Pattern state, without mixture
of other states; otherwise no continuous data is
required for triggering.
(6) Trigger Counter
A: Enter the intended times in the entry box of
“Trig Counter” at right-hand information
column, within the range of 1~255 times.
* If the entry exceeds 255 times, 255 times is limited
during system setting.